Axibari
Axial deflection deburring toolaxial deflection deburring tool
Axial compensated
Deburring tool for brushing
SPINDLE SPEED 6.000rpm
ROTATION : CW & CCW
FEED : 500-4000 mm/min
-
The holder has a top rated speed of 6.000min.
-
The gripping range of the collet is ø1 to ø16mm for ER25.
-
Built-in mechanism to contract 15mm in the axial direction.
- AXIBARI is capable of applying constant pressure of the brush
against the surface to work. - AXIBARI allows brushing cycles with less need for corrections
on the program to compensate the wear of the brush - AXIBARI brush wear correction steps doesn’t need high precision
like using the brush rigid direct on the spindle - AXIBARI is suitable also for sealing groove polishing with an abrasive
stick in place of the brush wherethe groove is too little for a brush
AXIBARI has built-in load adjustment mechanism.
![AXIBARI_IT-1](https://www.yamatoroll.eu/wp-content/uploads/2022/12/AXIBARI_IT-1-1-340x1024-1.png)
![AXIBARI_IT-4](https://www.yamatoroll.eu/wp-content/uploads/2022/12/AXIBARI_IT-4.png)
The gripping range of the collet is ø1 to ø16mm for ER25.
![AXIBARI_IT-5](https://www.yamatoroll.eu/wp-content/uploads/2022/12/AXIBARI_IT-5-288x300-1.png)
![AXIBARI_IT-3](https://www.yamatoroll.eu/wp-content/uploads/2022/12/AXIBARI_IT-3.png)
Included Accessories:
![AXIBARI_IT-8](https://www.yamatoroll.eu/wp-content/uploads/2022/12/AXIBARI_IT-8-300x127-1.png)
ERM25 spanner
![AXIBARI_IT-9](https://www.yamatoroll.eu/wp-content/uploads/2022/12/AXIBARI_IT-9-150x150-1.png)
ER25 collet 6,10,13,16
![AXIBARI_IT-12](https://www.yamatoroll.eu/wp-content/uploads/2022/12/AXIBARI_IT-12-150x150-1.png)
ERM25 nut